2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 314Get this manual
11-14 PUMP AND IMPELLER Pump and Impeller
Install the followingPump Cap Pump Cap Plug Spacer Pump Outlet Steering Nozzle OApply non-permanent locking agent to the thread of the followingPump Cap Bolts Pump Outlet Mounting Bolts Steering Nozzle Pivot Bolts
TorquePump Cap Bolts: 3.9 Nm (0.40 kgf.m, 35 in.lb) Pump Outlet Mounting Bolts: 19 Nm (1.9 kgfm, 14ftlb) Steering Nozzle Pivot Bolts: 19 Nm (1.9 kgf.m, 14 ft.lb)
Be sure the pump seal [A] is in place on the pump case
JK0.40HR I
When installing the water hose joint [A] for cooling intercooler and the cover [B], install them as followsOApply high grade water resistance grease to the O-ring [C] OApply non premanent locking agent to the bolts [0] Olnstall the water hose joint as shown45 [E]