2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 272Get this manual
ENGINE BOTTOM END 8-25 Crankshaft and Connecting Rods
Crankshaft Side Clearance
elnsert thickness gauge [A] between the thrust washer [B] and the crank web [C] at the No3 main journal to determine clearance If the clearance exceeds the service limit, replace the thrust washer as set and check the width of the crankshaft #3 main journalCrankshaft Side Clearance Standard: 0.050.24 mm (0.00200.0094 in Service Limit: 0.44 mm (0.017 in
e Measure the crankshaft #3 main journal width [A]If the measurement exceeds the standardreplace the crankshaft [B] Crankshaft #3 Main Journal Width Standard: 27.4527.55 mm (1.0807 -1 .0846 in