2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 266Get this manual
ENGINE BOTTOM END 8-19 Crankshaft and Connecting Rods
CAUTION
To minimize vibration, the connecting rods should have the same weight mark
Big End Cap [A] Connecting Rod [B] Weight Mark, Alphabet [C] Diameter Mark [0] If the connecting rodsbig end bearing inserts, or crankshaft are replaced with new onesselect the bearing insert and check clearance with plastigage before assembling engine to be sure the correct bearing inserts are installed
GI05060 S1
CAUTION
The connecting rod bolts are designed to stretch when tightenedNever reuse themSee the table below for correct bolt and nut usage
e Apply grease and oil to the following portions Apply molybdenum disulfide grease [A] Do not apply grease and oil [B]Apply molybdenum disulfide oil solution [C]
CAUTION
Do not apply grease to the inner surface of the lower big end cap or to the outer surface of the lower bearing insert