2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 245Get this manual
ENGINE REMOVAUINSTALLATION 7-7 Engine RemovalInstallation
Lift the engine [A] from the engine compartment
Engine Damper Removal
Remove: Engine Damper Mounting Bolts [A] Engine Damper [B] Shim [C] (0pieces) Bow [0] Record the number of shims of four positions so they can be put back in the same position
CAUTION
Install the shims to the same positionIncorrect shims could cause drive shaft misalignment
JGOJ009BS2
Engine Damper Installation
Install the shim(s) of the same number Apply non-permanent locking agent to the engine damper mount bolts, and tighten them TorqueEngine Damper Mounting Bolts: kgfm12 ftlb) 16 Nm (1.6