2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 217Get this manual
ENGINE TOP END 6-19 Camshaft, Camshaft Chain
OThe timing marks must be aligned with the cylinder head upper surface [A] (JT1500E9F Late ModelF9F Late Model) EX mark [8] #1 Pin [C] #2 Pin [0] IN mark [E] #31 Pin [F]
JF0800SB C
Install the camshaft cap [A] and upper camshaft chain guide [8] While pushing the camshaft chaintighten all camshaft bolts and chain guide boltsOlnstall the longer (white) bolts to the #10 and #14 position shown by triangle marksOFirst tighten the all camshaft cap and chain guide bolts evenly to seat the camshaft in placethen tighten all bolts following the specified tightening sequenceTorqueCamshaft Cap Bolts: 12 Nm (1.2 kgfm104 inlb) Upper Camshaft Chain Guide Bolts: 12 Nm (1.2 kgfm104 inlb)
JF08001BSI C
Tighten the camshaft chain tensioner (see Camshaft Chain Tensioner installation)OTurn the crankshaft counterclockwise two turns Install the cylinder head cover (see Cylinder Head Cover installation)