2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 212Get this manual
6-14 ENGINE TOP END Camshaft Chain Tensioner
Camshaft Chain Tensioner Removal
CAUTION
This is non-return type camshaft chain tensioner [A]The push rod does not return to its original position once it moves out to take up camshaft chain slackObserve all the rules listed below: When removing the tensioner, do not take out the mounting bolts only halfwayRetightening the mounting bolts from this position could damage the tensioner and the camshaft chainOnce the bolts are loosened, the tensioner must be removed and reset as described in "Camshaft Chain Tensioner installation Do not turn over the crankshaft while the tensioner is removedThis could upset the camshaft chain timingand damage the valves Remove the seat (see Seat Removal in the HullEngine Hood chapter) Pull off the spark plug caps and place the spark plug leads [A] out of the engine compartment Disconnect: Fuel Hose (Delivery Pipe Side) Air Bypass Duct [B] (Air Box Side)