2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 196Get this manual
5-6 EXHAUST SYSTEM Exhaust Manifold
Exhaust Manifold Removal
Removal: Exhaust Pipe (see Exhaust Pipe and Muffler Body Removal) Muffler Body (see Exhaust Pipe and Muffler Body Removal) Unscrew the exhaust manifold nuts [A] and bolts [B] Disconnect the flushing hose [C] Remove the exhaust manifold [0]
Exhaust Manifold Installation
Refer to Engine Installation in the Engine RemovalInstallation chapter Install the new gasket [A] before installing the exhaust manifold Torque:
TorqueExhaust Manifold Mounting Nuts: 30 Nm (3.1 kgf.m, 22 ftlb) Exhaust Manifold Mounting Bolts: 30 Nm (3.1 kgf.m, 22 ftlb)
O Using the adapter [A} as shown, tighten the exhaust manifold mounting nuts and bolts to the specified torque