2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 180Get this manual
4-16 ENGINE LUBRICATION SYSTEM Breather Case and Oil Separator Tank
Breather Case Removal (JT1500B7F Model)
Remove: Seat (see Seat Removal in the HullEngine Hood chapter) Exhaust Manifold (see Exhaust Manifold Removal in the Exhaust System chapter) Clamp [A] Breather Hose [B] Breather Case Mounting Bolts [C] Pull the breather case [D] upward
Breather Case Installation (JT1500B7F Model)
If the breather pipe [A] removedinstall the pipe as followOApply grease to the O-ring [B] Olnstall the O-ring to the short length pipe side [C] of the breather pipeOlnstall the breather pipe so that the short length pipe side faces downward TorqueBreather Pipe Bolts: 8.8 Nm (0.90 kgf.m, 78 in.lb)