2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 179Get this manual
ENGINE LUBRICATION SYSTEM 4-15 Oil Cooler
Oil Cooler Assembly
e Apply grease to new a-ringsand fit them on to each groove of the coolers securelye Apply silicon sealant to the joints and tighten themSealantLiquid Gasket, TB1211: 56019-120 TorqueOil Cooler Assembly Bolts: 7.8 Nm (0.80 kgfm69 inlb) Water Hose Joints: 20 Nm (2.0 kgfm14 ft.lb)
elnstall the oil cooler (see Oil Cooler Installation)
Oil Cooler Inspection
e Start the engine to check for water and oil leaksIf the water and oil leak, replace the a-rings