2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 178Get this manual
4-14 ENGINE LUBRICATION SYSTEM Oil Cooler
Apply engine oil to the thread [A] of the passage bolt and a-ring [B] of the oil filter [C] Tighten the oil filter (PNo 16097-1072)TorqueOil Filter: 18 Nm (1.8 kgf.m13 ftlb)
Connect the oil pressure switch connector securely Install the cooling hoses (see Cable, Wire and Hose Routing section in the Appendix chapter) Install the inlet manifold (see Inlet Manifold installation in the Fuel System (OFI) chapter)
Oil Cooler Disassembly