2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 150Get this manual
FUEL SYSTEM (DFI) 3-91 Inlet Manifold
e Replace the injector seals [A] with new onese Apply grease to the inside and outside of sealse Tighten the delivery pipe mounting bolts [8]TorqueDelivery Pipe Mounting Bolts: 7.8 Nm (0.80 kgfm, 69 inlb)
elnstall the fuel hose (see Fuel Hose Installation)e Route the cable, wire and hose correctly (see Cable, Wire and Hose Routing in Appendix chapter)