2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 138Get this manual
FUEL SYSTEM (OFI) 3-79 Supercharger
OMeasure the clearance of the pulley plate using clearance gaugePulley Plate Clearance Standard: 0.81.1 mm (0.030.04 in
If the clearance is out of the standard valueremove the pulley plate and adjust with shim (s)
Supercharger Drive Belt Replacement
Remove: Seats (see Seat Removal in the HullEngine Hood chapter) Rear grip plate (see Rear Grip Plate Removal in the HullEngine Hood chapter) Breather Hose Clamp [A] Breather Hose [B) Mounting Bolts and Washers [C] Place the oil separator tank [A] as shown