2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 137Get this manual
3-78 FUEL SYSTEM (OFI) Supercharger
If the pulley assy has been replacedadjust the shim(s)Thickness
1 mm (0.04 in 0.5 mm (0.02 in 0.3 mm (0.01 in 0.1 mm (0.003 in
OThe pulley assy (pNo49079-3703) includes the following shimsPieces
OUsually, one each of mm (0.04 in, 0.3 mm (0 .01 in0.1 mm (0.003 in thick shim and two of 0.5 mm (0.02 in thick shims are usedBe careful to put the mm (0.04 in thick shim [A] first because it is hardening shim
Olnsert the shaft into the pulley plate [A] and tighten the pulley bolt [B] (JT1500B7FB8FE9F Early ModelF9F Early Model) TorquePulley Bolt: 19 Nm (1.9 kgf.m14 ft.lb)
Olnsert the shaft into the pulley plate [A] and tighten the pulley nut [C] (JT1500E9F Late ModelF9F Late Model)co