2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 113Get this manual
3-54 FUEL SYSTEM (OFI) Oil Temperature Sensor (Service CodeCharacter-730ILt)
Oil Temperature Sensor Removallnstalation CAUTION
Never drop the sensor, especially on hard surfaceSuch shock to the sensor can damage it
Remove: Seat (see Seat Removal in the HullEngine Hood chapter) Oil Temperature Sensor [A] Fill the hollow of the oil pan [A] with the specified silicone grease [8] as shownbefore installing the oil temperature sensor [C] [0] mm (0.2 in
Silicone Grease -Grease, SCH-20: 92137-1002
Tighten :
TorqueOil Temperature Sensor: 15 Nm (1.5 kgf.m, 11 ftlb)
JC 1(i 059BSI C
Output Voltage Inspection NOTE
O Be sure the battery is fully charged Remove the ECU (see ECU Removal) Do not disconnect the connectorcc