2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 85Get this manual
3-26 FUEL SYSTEM (OFI) Th rattle Sensor (Service CodeCharacter-lltPS)
Throttle Sensor RemovalAdjustment
CAUTION
Never drop the throttle sensor [A], especially on hard surfaceSuch shock to the sensor can damage it RemoveSeat (see Seat Removal in the HullEngine Hood chapter)
Use Torx wrench [A] (T20= 3.86 mm (0.152 in) to remove the throttle sensor mounting screws [C]
O ln the engine compartment, there is not enough space between the throttle sensor and hull to remove the Torx screwsSo use an shape Torx wrench
JC1607 1BS I
When installing the throttle sensor, note the following (In the photothe throttle sensor has been removed from the throttle body for clarity) OAlign [A] the projections [8] on the throttle senso with the throttle shaft [C] as shown when putting the throttle sensor to the throttle bodycc