2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 26Get this manual
2-4 PERIODIC MAINTENANCE Torque and Locking Agent
The following tables list the tightening torque for the major fastenersand the parts requiring use of non-permanent locking agent or silicone sealantLetters used in the "Remarks" column mean: EO: Apply oil to the threads and seating surface L: Apply non-permanent locking agent (Medium Strength: Loctite 242 Equivalent)LNApply non-permanent locking agent (High Strength: Loctite 271 Equivalent)MO: Apply molybdenum disulfide grease oil solution R: Replacement PartTighten the fasteners following the specified sequence SSApply silicone sealant to the threads
Fastener Fuel System
Vehicle-down Sensor Mounting Screws Bracket Mounting Bolts Inlet Manifold Mounting Bolts Inlet Manifold Mounting Nuts Delivery Pipe Mounting Bolts Inlet Air Pressure Sensor Bracket Bolts Inlet Air Temperature Sensor Throttle Body Assy Mounting Bolts Inlet Manifold Drain Plug Throttle Body Assy Damper Bolts Crankshaft Sensor Screws Camshaft Position Sensor Bolt Water Temperature Sensor Oil Temperature Sensor ECU Mounting Bolts Relay Bolts Throttle Sensor Mounting Screws ISC Actuator Mounting Bolts Fuse Bracket Bolt Harness Bolts Charging Temperature Sensor Fuel Filler Tube Clamp Screws Fuel Pump Holder Clamp Screws Oil Separator Tank Mounting Bolts Air Box Bracket Bolts Air Box Bolts Rear Supercharger Bolts Belt Tensioner Plate Bolts Idler Bolt Intake Pipe Bolts (INOUT) Gear Oil Level Gauge Front Supercharger Bolts Drain Bolt