2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 12Get this manual
1-6 GENERAL INFORMATION Before Servicing
Assembly Order
In most cases assembly order is the reverse of disassembly, however, if assembly order is provided in this Service Manual, follow the procedures given
G6020 116
Tightening Sequence
Generally, when installing part with several bolts, nuts, or screwsstart them all in their holes and tighten them to snug fitThen tighten them according to the specified sequence to prevent case warpage or deformation which can lead to malfunction Conversely when loosening the bolts, nuts, or screws, first loosen all of them by about quarter turn and then remove themIf the specified tightening sequence is not indicated, tighten the fasteners alternating diagonally
G6020 126 S
Tightening Torque
Incorrect torque applied to bolt, nut, or screw may lead to serious damageTighten fasteners to the specified torque using good quality torque wrench