2004-2006 Kawasaki 900 STX Jet Ski Service Manual, Page 97Get this manual
ENGINE REMOVALINSTALLATION 7-5 Engine RemovalInstallation
Installation Notes
Be sure there are no foreign objects and parts inside of the hullCooling Clean the bilge filter (see chapter).and Bilge Systems in the periodic Maintenance Check the couplingindamper for wear and damage (see Engine Bottom End the Periodic Maintenance chapter)that the small notches Install the engine bed soengine as shown[A] are on the magneto end of the Apply non-permanent locking mounting bolts and tighten themagent to the engine
between Check the gap enginethe engine bed and the dampers by rocking the gap, insert suitable If there isthe damper to achieve shim between the engine bed and good fitShim Selection Shim No92025-3705 92025-3706 92025-3707 92025-3708 Thickness 0.3 mm (0.012 in 0.5 mm (0.020 in 1.0 mm (0.039 in 1.5 mm (0.059 in