2003 Kawasaki JetSki 800 SX-R Factory service manual, Page 212Get this manual
13-30 ELECTRICAL SYSTEM Electric Case
Run the lead connectors [A] of the igniter and regulatorlrectifier through the electric case hole, before installing the regulatorlrectifierConnect the ground lead (black) terminals of the regulatorlrectifier, igniter and starter relay to the regulatorlrectifier mounting bolt [B]Install: Ignition Coil [C] (see Ignition Coil Installation) RegulatorIRectifier [Dl (see RegulatorIRectifier Installation) CDI Igniter [El(see CDI Igniter Installation) Starter Relay [F] (see Starter Relay Installation) Temperature Sensor [GI (see Temperature Sensor Installation) Fuse Assembly [HI Applya non-permanent locking agent to the following bolts and tighten themTorque RegulatorIRectifier Mounting Bolts: 8.8 N-m (0.9 kgf-m, 78 in-lb) CDI Igniter Mounting Bolts: 8.8 N-m (0.9 kgf-m, 78 in-lb) Ignition Coil Mounting Bolts: 8.8 N-m (0.9 kgf-m, 78 in-lb)