2003 Kawasaki JetSki 800 SX-R Factory service manual, Page 205Get this manual
ELECTRICAL SYSTEM 13-23 Ignition System
Ignition Coil Primary Peak Voltage Inspection
0 Be sure the battery is fully charged
Remove the electric case (see Electric Case Removal) and open the case (see Electric Case Disassembly)Pull all the spark plug caps from the spark plugs and push the caps [A] fully onto the spark plug cap holder
0 Maintain the correct value of compression pressure for
the cylinderBe sure to measure the voltage with the spark plug installed to the cylinder head)Install commercially available peak voltage adapter [B] to the hand tester [C] and needle adapter set [DlConnect the adapter between the BKW and leads in the ignition coil primary lead connector[El Ignition Coil [F] CDI Igniter
Recommended Tool: Peak Voltage Adapter Type: KEK-54-9-B Brand: KOWA SE1KI Special Tools Hand Tester: 57001-1394 Needle Adapter Set: 57001-1457 Hand Tester Range: 250 DC Primary Lead Connections: Ignition Coil Adapter OR BK Tester (+) (-)