2003 Kawasaki JetSki 800 SX-R Factory service manual, Page 104Get this manual
ENGINE REMOVALIINSTALLATION 6-7 Engine Removalllnstallation
Install the engine bed so that small notches [A] are on the magneto end of the engine as shown[B] Front Side
Applya non-permanent locking agent to the following bolts, and tighten themTorque Engine Mounting Bolts: 36 N-m(3.7 kgf-m,27 ft-lb) Engine Bed Mounting Bolts: 36 N-m(3.7 kgf-m, 27
Check the gap between the engine bed and the dampers by rocking the engineIf there is gap, inspect suitable shim between the engine bed and the damper to achieve good fitShim Selection Part Number of Shim
Thickness