2003 Kawasaki JetSki 800 SX-R Factory service manual, Page 83Get this manual
4-6 EXHAUST SYSTEM Exhaust Manifold
Removal
Remove the exhaust pipe, the front muffler and the expansion chamber as set (see Expansion Chamber Removal)Disconnect the inlet cooling hose [A] from the lower part of the exhaust manifold [B]Remove the exhaust manifold mounting nuts [C]Take the exhaust manifold off the cylinder
Installation
Install the exhaust manifold gaskets so that each arrow [A] points upwards and is on the outside of the flangeBow [B]
The cooling hose clamp bolt [A] should face toward cylinder [B] and another hose clamp bolt [C] outsideTorque the exhaust manifold mounting nuts, following the specified tightening sequenceTorque -Exhaust Manifold Mounting Nuts: 20 N-m (2.0 kgf-m, 14.5 ft-lb)