2003 Kawasaki JetSki 800 SX-R Factory service manual, Page 63Get this manual
FUEL SYSTEM 3-23 Carburetor
Carburetor Assembly
If the mixture screws were removed, install them, as shown[A] High Speed Screw [B] Low Speed Screw apply non-permanent locking agent to the cap [C] inside
Apply grease to the O-ring [A] on the inlet valve holder [B]Install: Inlet Valve Holder Holder Plate Screw TorqueHolder Plate Screw: 0.98 N-m(0.10 kgf-m,8.7 in-lb)