2003 Kawasaki 1100 STX D.I. Jet Ski Factory Service Manual, Page 244Get this manual

2003 Kawasaki 1100 STX D.I. Jet Ski Factory Service Manual, Page 244

ELECTRICAL SYSTEM 14-23 Ignition System

The ignition system produces extremely high voltageDo not touch the spark plugs, ignition coils, or spark plug leads while the engine is running, or you could receive severe electrical shock
Crank Position Sensor (CPS) Inspection

leads connector Disconnect the 2-pintoCPS coil100 range, zero(Blue) [A]Set the hand tester the it, and connect the CPS lead terminals (Orange and Black) in the connectorit to If there is more resistance than the specified value, the coil has an open lead and must be replacedMuch less than this resistance means the coil is shorted, and must be replacedCrank Position Sensor (CPS) Resistance Standard: 430 30

Ignition Coil Removal

Pull the spark plug cap[A] Pull the primary lead connector andoff the ignition coilcoilUnscrew the mounting bolts [B] remove the ignition