2003 Kawasaki 1100 STX D.I. Jet Ski Factory Service Manual, Page 196Get this manual
STEERING 12-5 Steering Cable
Steering Cable Adjustment
adjustment Check the steering cablethe straight-ahead positionCenter the handlebar in
Check that the steering nozzle [A] is centered in the pump cavity
adjust the steering cable If necessarylocknut [A] on the steering cableLoosen the Take out the cable joint bolt [B] and disconnect the cable joint [C] from the steering nozzleTurn the joint on the cable to adjust the steeringTemporarily tightening the cable joint bolt, connect the joint with the nozzle and check cable adjustment againWhen adjustment is correct, unscrew the cable joint bolt and apply non-permanent locking agent to itAnd tighten the cable joint bolt and the steering cable locknut securelyTorque Cable Joint Bolt: 9.8 (1.0 kgf m, 87 in lb)