2003-2005 Kawasaki JetSki Ultra-150 Factory Service Manual, Page 250Get this manual
ELECTRICAL SYSTEM 14-49 Sensors
Throttle Sensor RemovalInstallation CAUTION
Do not remove the throttle sensor [B] unnecessarily(see Fuel System) Remove the carburetorscrews [A] and remove the throttle Unscrew the mounting sensor [B]to adjust the throttle Be sure Sensor Adjustment)sensor when installing (see Throttle
Throttle Sensor Inspection
Start the engine and warm it up thoroughlyCAUTION
Do not run the engine without cooling water supply for more than 15 seconds or severe engine and exhaust system damage will occur
Check: (see Periodic Maintenance chapter) Idle Speed
Battery Charging Condition (see this chapter) Turn the ignition switch offRemove the throttle sensor lead connectorConnect the adapter [A] between the connectors [B]Special ToolThrottle Sensor Setting Adapter: -1400 57001