2003-2005 Kawasaki JetSki Ultra-150 Factory Service Manual, Page 179Get this manual
12-8 STEERING Trim Cable
Remove the pump (see Pump Removal in the PumpImpeller chapter) Unscrew the large nut [A] in the hull with wrench
Slide off the E-ring [A], washer [B], and O-ring [C]
fuel tank toward the Slide the[B] with the cableright [A] to remove the trim actuator
Loosen the upper clamps on the fuel and oil inlet tube,
and pull down the tubesUnhook the straps for the fuel and oil tanks
connector of Disconnect thefrom the cablethe trim actuator leads.comdetent in the engine Pull the cable partment Pull out the trim cable with the trim actuator