2003-2005 Kawasaki JetSki Ultra-150 Factory Service Manual, Page 177Get this manual
12-6 STEERING Steering Cable
Remove the pump (see Pump Removal in the PumpImpeller chapter)Unscrew the large nut [A] in the hull with wrench
Slide off the E-ring [A], washer [B], and O-ring [C]
Pull the cable from the cable detent in the engine compartment Pull out the steering cable toward the front
Steering Cable Installation
short Slide aend to piece of rubber or plastic tubing over the rear cable guide the cable through the hullLubricate the outside of the new cable to ease cable in stallation Torque: Applyandnon-permanent locking agent to the cable joint bolts torque themTorqueSteering Cable Nut: 39 Nm (4.0 kgfm, 29 ftlb)