2003-2005 Kawasaki JetSki Ultra-150 Factory Service Manual, Page 175Get this manual
12-4 STEERING Steering Cable
Steering Cable Adjustment
adjustment Check steering cable in the straight-ahead positionCenter the handlebar
Check that the steering nozzle is centered [A] in the pump cavity
If necessary adjust the steering cableLoosen the locknut [A] on the steering cableTake out the cable joint bolt [B] and disconnect the cable joint [C] from the steering nozzleTurn the joint on the cable to adjust the steeringTemporarily tightening the cable joint bolt, connect the joint with the nozzle and check cable adjustment againWhen adjustment is correct, unscrew the cable joint bolt and apply non-permanent locking agent to itAnd tighten the cable joint bolt and the steering cable locknut securelyTorqueCable Joint Bolt: 9.8 Nm (1.0 kgfm, 87 inlb)