2003-2005 Kawasaki JetSki Ultra-150 Factory Service Manual, Page 120Get this manual
ENGINE REMOVALINSTALLATION 7-5 Engine RemovalInstallation
toward the front to Slide the enginelift the engine [A] outdisengage the couplings, and then of the hull
Lift the engine by using the plates [A]Perform the following services while the engine is lifted
to make them easierOil Pump Cable Disconnection Inlet Cooling Hose Disconnection Starter Motor Cable Disconnection Remove the engine mount
Installation
Be sure there are no foreign objects and parts inside of the hullthe bilge filter (see Filter Cleaning and Clean Cooling and Bilge Systems chapter)Inspection in the coupling damper wear and Check theDamper Inspectionfor the Enginedamage (see Coupling in Bottom End
chapter)Apply non-permanent locking agent to the engine mount bolts [A] and torque themTorqueEngine Mount Bolts: 34 Nm (3.5 kgfm, 25 ftlb)