2000-2001 Kawasaki 1100 STX D.I. Jet Ski Factory Service Manual., Page 256Get this manual
STORAGE 14-3 Preparation for Storage
Remove the air intake cover [A] from the throttle body Lift out the flame arresters and clean them, if necessary (see Flame
Arrester Cleaning in the Fuel System chapter) Spray penetrating rust inhibitor down the throttle body bore Install the flame arrester Reinstall the cover, apply non-permanent locking agent to the
threads of the air intake cover bolts and tighten securely
Remove the spark plugs and push the plug caps fullyonto the plug cap holder on the electric case Pour one ounce of motor oil into each cylinder,
CAUTION
Do not use too much oil, or the crank seals may be damaged when the engine is next startedTurn the ignition switch onPush the lanyard key under the stop buttonTurn the engine over several times with the start button to coat the cylinder walls with oil0 Pull the lanyard key off the stop button and turn the ignition switch off0 Reinstall the spark plugs and caps0 0