2000-2001 Kawasaki 1100 STX D.I. Jet Ski Factory Service Manual., Page 182Get this manual
PUMP AND IMPELLER 10-11 Pump and Impeller
m Replace thle grease seals with new ones, if necessary, and install
themSpecial Tool
Bearing Driver Set: 57001-1 129
0 Press each seal [A] into the pump case so that the side with the spriing
seals, and between the faces outwardFill [B] the gap between the seal and the bearing with grease Install the circllip LC] Push the bushing [Dl into the pump casem Wisuallly inspect into the pump shaft O-rings [El, and replace them if necessarym Grease the pump shaft and insert it from rear of the pump case
Screw on the inpeller and torqueSpecial Tools Impelller Holder: 57001-11393 Impeller Wrench: 57001-1228 Torque Impeller: 98 (10 kg m, 72 ttlb) Visually inspect impeller grease seal [A], and repilace it if necessary