2000-2001 Kawasaki 1100 STX D.I. Jet Ski Factory Service Manual., Page 153Get this manual
7-10 ENGINE BOTTOM END Stator
Install the stator assembly on the magneto cover, noting the following
0 Apply water resistant grease [A] to the grommet [B]and put it as
shown [C]7 Install the grommet plate [Dl so as not to bite the stator lead [El between the plate and coverS Apply non-permanent locking agent to the grommet plate mounting bolts [F] and torque themTorque Grommet Plate Mounting Bolls: 8.80.9 kg m,78 in Ib) Be sure the shims [GI is in position and apply nonl-permanent locking agent to the stator mounting bolts [HIand torque themStator Mounting Bolts: 12 N-m1.2 kg m, 104 in Ib) Torque