1996-2002 Kawasaki 1100ZXi Jet Ski Factory Service Manual., Page 79Get this manual
6-4 ENGINE REMQVALlNSTALLATIQN
Installatim
Besure there are no foreign objects and pa& nside the hull of .Clean the bilge filter (see Filter Cleaning and Inspection in the Cooling and 51IgeSystems chapter)Check the coupiing damper for wear and damage (see Coupling Damper in the Engine Bottom End chapter) Install the engine so that the small notches [A] are on the magneto end of the engine as shown
Install the engme in the hullfl ahgning the prqectm-i [A] on the magneto coalmg cover with the prajection [B] the bottom of the hull
Apply non-permanent Locking agent 10 the engine bed mounting bolts, and torque themTorqueEngine Mounting Bolts 44 M-rn (4.5 kg-m, 33 ft-lb) Engine Bed Mounting Bofb: 36 N-m 43.7 kg-m, 27 fl-rb] Check the gap between the engine bed and the dampers by rockmg the engine.f there is gap, insert suitable shim between the engine bed and the damper to achieve good fitShim Selection Shim No92025-3705 92025-3706 gzwi4707 92025-37W