1995-2004 Kawasaki JetSki 750ZXi 900ZXi Factory Service Manual, Page 142Get this manual
M,easure the distance from the pump outlet end to steerinq nozzle end at the upper and lower locations, as shown Check the both distances [A] are same .If necessary adjust the t,ilt cable
o Disconnect the ball joint by sliding the' outer sleeve [Alawav 'from the barl and t,fting the cable from the ball Turn the baU joint on the cable to adjust the tilt angle,0 Connect the ball joint and check cable adjustment ag'ain" When adjustment is correct tighten the tilt cable locknut.Turn the igniti10n switch OFF
Steerinq Cebte Remove!