1992-1998 Kawasaki PWC Jet Ski Service Repair Manual., Page 231Get this manual
CRANKING MOTOR SERVICE BRUSH PLATE
WEGAT IVE
REAR COVER
THRU-BOLT
FRONT COVER
THRU-BOLT
BRUSH PLATE
2- Remove the two long thru bolts and pull off the rear and front coversRemove and discard the two O-rings3- Pull the armature shaft free of the motor frameMake note of the type and number of washers at each end of the shaftPlace them in order on the workbench in order of removal as an assist in later assemblyIncorrect placement of these washers will cause the armature be misaligned with the brushes and the field magnets during assembling4- Identify the two positive brushesThese brushes have insulated leads between the carbon brush and the positive terminal in the motor frameLift off the retaining