1992-1998 Kawasaki PWC Jet Ski Service Repair Manual., Page 200Get this manual
CLEANINGINSPECTING
5- Connect the cooling hose from the cylinder head to the aft end of the exhaust elbow and secure it with the hose clamp6- Take note of the embossed andor stamped marking on the carburetor base gasketInstall the gasket accordingly, taking note of die alignment pinsLower the carburetor rack onto the base SLOWLY to prevent damaging the gasket
8- Lower the flame arrestor box onto the carburetorsWith the arrestor screens removed, install and tighten the long carburetor mounting bolts to torque value of 69 in Ib (7.8Nrn)Insert the flame arrestor screens in the arrestor box, and then install and tighten the cover mounting bolts to torque value of 69 in Ib (7.8Nrn)Install the stay mounting bolts and tighten these bolts to 69 in Ib (7.8Nrn)8-7 CLEANING AND INSPECTING