1992-1998 Kawasaki PWC Jet Ski Service Repair Manual., Page 145Get this manual
ENGINE tap with hammer on the end of the boltThis shock will assist in "breaking" the flywheel loose from the crankshaftDO NOT "pound" on the boltT of such would to the seals and bearings along the and damageNEVER the flywheel because this of shock would surely the flywheel magnets to loose the magnetism6- Pull the flywheel of the crankshaftRemove and save the Woodruff key from the keyway
jar freeR and discard the sealing ring, only if is availableSPECIAL WORDS If the oil seals are to be
removed, install the flywheel holder to the flywheel and insert the coupler holder into the metal couplerP the flywheel from rotating and unthread the metal coupl from the of the crankshaft
If servicing 550 Series engine, bend back the lockwasher tabs behind die flywheel nutNow, using the flywheel holder tool previously listed for the engine being serviced, insert the two indexing pins on the ends of the arms through the holes in the flywheelPrevent the flywheel from rotating with the special toolAn assistant can help by holding the flywheel in place while loosening the flywheel fastenerLoosen, then remove the flywheel nut and washer 650 Series; the tabbed lockwasher -550 Series; flanged bolt 750 Series5- Install the flywheel puller onto the flywheel, and the using the center bolt, strain on the puller with c