1986-1991 Kawasaki 650 X-2 Service Manual, Page 94Get this manual
10-6 PUMP AND IMPELLER eHold the shaft in vise, taking care not to damage itRemove the impeller from the pump shaft with the impeller wrench (special tool) and then pull out the pump shaft.elnsert metal rod into the pump case from the rear end, and remove the front end bearing by tapping evenly around the bearing inner raceThe distance collar comes out with the bearingeRemove the remaining bearing by tapping evenly around the bearing inner race from the front end
Pump Bearing Removal
AImpeller Wrench: 57001-1228 ePull out the bushing