1986-1991 Kawasaki 650 X-2 Service Manual, Page 92Get this manual
10-4 PUMP AND IMPELLER Pump and ImpeUer
Pump Removal -Turn the craft on its ;Ieft side-Unscrew the grate mounting bolts and remove the grate-Unscrew the pump cover mounting bolts and remove the pump cover
AMounting Bolts -Cut the sealant at the pump intake area-Slide the pump to the rear to disengage the drive shaft, and remove it from the hull
APump Cover BGrate
CMounting Bolts
Pump Installation -Strip off all the old sealant around the pump intake-Grease the splines on the drive shaft with water resistant grease, and be sure t1he O-ring is in place inside the pump shaft-Liberally coat the outside edge of the pump intake area with silicone sealant to form seal between the pump and the hul.1