2008 Yamaha Rhino YXR70FX Factory Service Manual, Page 414Get this manual
STEERING SYSTEM
hAttach the assembled ball joint remover, new ball joint and installer attachment to the steering knuckle CTIP: Do not tap or damage the top of the ball jointiHold the body in place while turning in the long bolt to install the new ball joint into the steering knuckle CjRemove the ball joint removerkApply lithium-soap base grease to the new ball joint BlInstall new rubber boot and new circlipTIP: Always use new ball joint setmInstall steering knuckle oil sealLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
3Check: front wheel bearings Bearings allow play in the wheel hubs or the wheel turns roughly Replace oil seals Damage ReplaceMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM