2008 Yamaha Rhino YXR70FX Factory Service Manual, Page 349Get this manual
REAR CONSTANT VELOCITY JOINTS, FINAL DRIVE GEAR AND DRIVE SHAFT
hbearing thickness (considered constant) Bearing thickness 14.00 mm (0.55 in) Example: 1) If "98" is stamped on the final gear case,500.9850.98 2) If "55" is stamped on the ring gear bearing housing,+ 0.551.55 3) If "05" is stamped on the ring gear,35 0.0534.95 4)14.00 5) Therefore, shim thickness "B" is 0.48"B"50.98 1.55 (34.9514.00)49.43 48.950.48 6) Round off the hundredth digit and select the appropriate shim(s)In the example above, the calculated number is 0.48The chart instructs you to round off to 10 at the hundredth placeThus, the shim thickness is 0.50 mmHundredths 0, 1, 3, 4, 5, 6, 8, Rounded value 10