2008 Yamaha Rhino YXR70FX Factory Service Manual, Page 130Get this manual
ADJUSTING THE FRONT SHOCK ABSORBERS CHK ADJ
TIP: Always tighten the locknut against the adjusting ring, then torque it to specificationLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
2Adjust: rebound damping force
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
aTurn the adjusting screw in direction or bDirection Direction Rebound damping force is increasedRebound damping force is decreased
From the fully turned-in position Standard: 10 clicks out Minimum: 12 clicks out Maximum: clicks out NOTICE