2008 Yamaha Rhino YXR70FX Factory Service Manual, Page 128Get this manual
ADJUSTING THE TOE-INADJUSTING THE FRONT SHOCK ABSORBERS
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
aMark both tie-rods endsThis reference point will be needed during adjustmentbLoosen the locknut (tie-rod end) on each tie-rodcThe same number of turns should be given to both the right and left tie-rods until the specified toe-in is obtainedThis is to keep the length of the rods the samedTighten the rod end locknut on each tie-rodLocknut (rod end) 40 Nm (4.0 kg, 29 ft lb)