2008 Yamaha Raptor 250SE / 250SE2 Factory Service Manual, Page 97Get this manual
ADJUSTING THE TOE-IN EBS00108
ADJUSTING THE TOE-IN 1Place the machine on level surface2Measure: toe-in Out of specificationAdjustToe-in19 mm (0.350.75 in) NOTE: Before measuring the toe-in, make sure that the tire pressure is correctabcdMark both front tire tread centersFace the handlebar straight aheadMeasure the width between the marksRotate the front tires 180 until the marks are exactly opposite one anothereMeasure the width between the marksfCalculate the toe-in using the formula given belowToe-in =
Forward