2008 Yamaha Raptor 250SE / 250SE2 Factory Service Manual, Page 62Get this manual
GENERAL MAINTENANCE AND LUBRICATION CHART
EVERY 2500 (1600) 160 2500 (1600) 160 12 5000 (3200) 320
GENERAL MAINTENANCE AND LUBRICATION CHART
INITIAL Whichever comes first month km (mi) hoursAir filter element Clutch Clean and replace if necessary Check operation and adjust if necessary Check operation and correct if necessary Check fluid level and ATV for fluid leakage, and correct if necessary Replace brake pads Check operation and correct if necessary Check fluid level and ATV for fluid leakage, and correct if necessary Replace brake pads5 10 Brake hoses Parking brake Wheels Tires Wheel hub bearings Swingarm pivots Upper and lower arm pivots Drive chainDrive chain rollers Chassis fasteners Check for cracks or other damage, and replace if necessary Replace Check operation and adjust if necessary Check runout and for damage, and replace if necessary Check tread depth and for damage, and replace if necessary Check air pressure and balance, and correct if necessary Check for looseness or damage, and replace if necessary Check operation and for excessive play, and replace bearings if necessary Lubricate with lithium-soap-based grease Lubricate with lithium-soap-based grease Check chain slack and adjust if necessary Check rear wheel alignment and correct if necessary Clean and lubricate Check for wear and replace if necessary Make sure that all nuts, bolts, and screws are properly tightened&&&&&320 (200) 20 1300 (800) 80 CHECK OR MAINTENANCE JOB