2008 Yamaha Raptor 250SE / 250SE2 Factory Service Manual, Page 50Get this manual
CABLE ROUTING To the front panel To the front fender To the handlebar To the right headlight Make sure to route the oil cooler hoses 1and through the guide wireInstall the front brake hose 2, making sure to face the white paint mark forwardRoute the oil cooler hose and between the exhaust pipe and the engine bracket
Route the battery negative lead behind the clutch cable holderRoute the air vent hose through the bracketMake sure that the white paint mark on the air filter case breather hose Make sure that the clip end is facing the left side of the vehicleRoute the throttle cable under the cross pipe and left of the steering column as shown in the illustration