2008 Yamaha Raptor 250SE / 250SE2 Factory Service Manual, Page 12Get this manual
ASSEMBLING THE REAR BRAKE CALIPER 6-36 INSTALLING THE FRONT BRAKE CALIPERS 6-38 INSTALLING THE REAR BRAKE CALIPER 6-40 STEERING SYSTEM 6-42 HANDLEBAR 6-42 REMOVING THE CLUTCH SWITCH 6-44 REMOVING THE HANDLEBAR GRIPS 6-44 CHECKING THE HANDLEBAR 6-44 INSTALLING THE HANDLEBAR 6-45 INSTALLING THE HANDLEBAR GRIPS 6-45 INSTALLING THE CLUTCH LEVER6-46 INSTALLING THE BRAKE MASTER CYLINDER 6-46 STEERING STEM 6-47 CHECKING THE STEERING STEM6-48 INSTALLING THE STEERING STEM6-48 INSTALLING THE LOCK WASHER 6-48 TIE-RODS AND STEERING KNUCKLES6-49 REMOVING THE STEERING KNUCKLES6-50 CHECKING THE TIE-RODS 6-50 CHECKING THE STEERING KNUCKLES 6-50 INSTALLING THE TIE-RODS 6-50 FRONT ARMS AND FRONT SHOCK ABSORBER ASSEMBLIES 6-51 REMOVING THE FRONT ARMS 6-53 CHECKING THE FRONT ARMS 6-53 CHECKING THE FRONT SHOCK ABSORBERS 6-53 CHECKING THE BALL JOINTS 6-54 INSTALLING THE FRONT ARMS 6-54 REAR SHOCK ABSORBER, SWINGARM AND DRIVE CHAIN 6-55 HANDLING THE REAR SHOCK ABSORBER 6-57 DISPOSING OF REAR SHOCK ABSORBER 6-57 REMOVING THE REAR SHOCK ABSORBER6-58 CHECKING THE REAR SHOCK ABSORBER 6-58 REMOVING THE SWINGARM 6-58 CHECKING THE SWINGARM 6-59 CHECKING THE DRIVE CHAIN 6-60 INSTALLING THE SWINGARM 6-62 INSTALLING THE DRIVE SPROCKET 6-62