2007-2008 Yamaha YFM700 Grizzly Factory Service Manual, Page 338Get this manual
REAR CONSTANT VELOCITY JOINTS AND FINAL DRIVE GEAR
3) If "05" is stamped on the final drive pinion gear bearing housing,67.8 0.0567.75 NOTE: After replacing any part in the final drive pinion gear assembly, the overall length of the assembly will changeTherefore, be sure to measure distance to select the correct final drive pinion gear shim thickness4) If "01" is stamped on the final gear case,100 0.0199.99 5) Therefore, "A" is 0.58 "A"55(67.75 22.18) 99.990.58 6) Round off the hundredth digit and select the appropriate shim(s)In the example above, the calculated number is 0.58The chart instructs you to round off to 10 at the hundredth placeThus, the shim thickness is 0.60 mm (0.024 in)Hundredths Rounded value 10