2007-2008 Yamaha YFM700 Grizzly Factory Service Manual, Page 141Get this manual
ADJUSTING THE TOE-INCHECKING THE FRONT AND REAR SHOCK ABSORBERS
bLoosen the locknuts (tie-rod end) of both tie-rodscThe same number of turns should be given to both the right and left tie-rods until the specified toe-in is obtainedThis is to keep the length of the rods the samedTighten the rod end locknuts of both tie rodsLocknut (rod end) 15 Nm (1.5 kg, 11 ft lb)
NOTE: Adjust the rod ends so that and are equal_